Test your driveway gate’s safety sensors and auto-reverse once a month, and look over the hinges, track, opener, posts, and wiring at the same time. Lubricate on the schedule in your gate and opener manuals, and have a technician service the gate once a year.
A few minutes a month helps you catch small problems before they turn into a gate that won’t open, won’t close, or isn’t safe to use. Here is what to check, how to check it safely, and when to call for help.
Every month: test the safety sensors and auto-reverse
Automatic gates have safety devices that stop or reverse the gate when something is in its way. Most use photo eyes, which are small sensors on each side of the opening that send a beam across it. Many also have safety edges, which are soft strips along the edge of the gate that react when they touch something. Gate opener manuals commonly tell owners to test this safety system once a month. Your opener’s manual has the exact steps for your model.
In general, the test looks like this:
- Clear the area. Keep people, pets, and cars out of the gate’s path for the whole test.
- While the gate is moving, block the photo eye beam with an object, never a person or pet. The gate should stop or reverse.
- If your gate has safety edges, check that the gate reverses when an edge meets an object, as your manual describes.
If the gate does not stop or reverse, stop using the automatic opener and call a technician. Also retest the gate after anyone adjusts its force or travel settings. Do not change force settings or springs yourself unless your manual says you can.
At the same time: look over the gate, the opener, and the posts
While you are at the gate, take a quick look at its other parts. You are looking for changes since last month, not taking anything apart.
Hinges, rollers, and track. Look for wear, rust, and loose or damaged parts. On a slide gate, clear leaves, rocks, and dirt out of the track so the gate rolls freely. If the gate sounds rough or moves unevenly, make a note of it.
Opener and remotes. Listen to the opener as the gate moves. Grinding, straining, or a gate that slows down can mean it is working too hard. If a remote or keypad starts to work only up close, or only some of the time, try new batteries. Find your opener’s manual release so you know how to open the gate by hand if the power goes out. Use the release only when the gate is not moving.
Posts, frame, and wiring. Check whether a post is leaning or the gate is sagging, and look for loose bolts or hardware. Look at any wiring you can see, and at the ground over any vehicle loops (sensors buried in the driveway), for cuts, cracks, or damage.
Lubrication and yearly service
Lubrication needs are different for every gate and opener, and some parts need a certain kind of lubricant. Follow the schedule and the products named in your gate and opener manuals. Turn off power to the opener before you work near it, as the manual says.
Once a year, have a technician service the whole gate system. A technician can check and adjust the parts that are not safe for a homeowner to work on, such as the opener’s force and travel settings, springs, and wiring.
Book a gate maintenance visit
We offer gate maintenance visits. A technician can go through the safety sensors and auto-reverse, the hinges, rollers, and track, the opener and remotes, and the posts, frame, and wiring with you. If something needs repair, we will explain what we found. See our gate repair and installation services or call (682) 459-1700 to book a visit. We offer free estimates.
Homes and businesses in Dallas can see our Dallas garage door and gate services.
We also repair and install garage doors, including springs, cables, rollers, and openers. See our garage door services.