When a garage door goes down and then back up, or stops before it reaches the floor, it is usually reacting to something: the safety sensors, something in the door’s path or track, or the opener’s settings. Some of these you can check yourself in a few minutes. Others need a technician.
Safe checks you can do first
Keep people, pets, and cars out of the door’s path while you check.
- Look at the safety sensors. These are the two small “eyes” near the bottom of the tracks, one on each side. Make sure nothing blocks the beam between them and that they still face each other. If a sensor is blocked or bumped out of line, the door will go back up instead of closing.
- Clear the door’s path. Look for anything on the floor under the door or caught in the tracks.
- Check the manual lock. Make sure the door’s manual lock is not engaged.
- Look and listen. Watch the door close. Notice whether it looks crooked or makes grinding, popping, or squealing sounds, or whether the opener strains.
When to call a technician
Call for service if the door:
- still stops short or reverses after the sensors and path are clear, since the opener’s travel limits or force settings may need adjusting
- looks crooked, is off track, or has a bent track or cracked rollers
- feels unusually heavy, or a spring or cable looks loose or broken
Do not try to repair springs or cables yourself. They are under high tension and need proper tools and training.
Get your door closing again
If your garage door still won’t close all the way, see our garage door repair and installation services or call (682) 459-1700. We offer same-day service and free estimates.
We also repair and install driveway gates and gate openers. See our gate services.